Attach or detach the dinghy to the stern of the yacht in a maximum of 1 minute - safe from waves and wind! Transporting the dinghy on the yacht is quick and easy. TenderConnect connects your dinghy to the stern of your yacht in a stable and well-secured manner. This means you no longer have to worry about your dinghy in wind and waves. As a result, you can...
Quick and easy dinghy transportation on the yacht! Attach the dinghy to the stern of the yacht in a maximum of 1 minute - wave- and wind-proof - or detach it again! This version of TenderConnect is screwed to the stern of the yacht from the outside. This is always necessary if it is not possible to attach the counter plate and nuts from inside the stern.
We perform the installation of Tender-Connect on your vessels by trained professionals. This service package includes 5 installations at one location. Please make sure to fill in the contact details completely!
U-shaped bracket for installing TenderConnect on the inside of a motorboat bathing platform. This bracket was developed for the bathing platform of a lens motor yacht, but should generally also fit many other platforms. The drilling layout of the mounting surface consists of 9 oblong holes with which the angle can be easily attached and also easily aligned. The U-bracket is made of stainless...
Extend TenderConnect with easy to install transport wheels to slip your dinghy. A pair of slip wheels The fit to your TenderConnect preparations on the dinghy. The slip wheels have pneumatic rubber wheels with rims made of maintenance-free plastic with square lug profile in diameter approx. 26 cm.
Drilling templates for TenderConnect. You can use our drilling templates and the installation manual to check whether and how TenderConnect fits on your yacht. We will send you the necessary drilling templates for the installation of TenderConnect free of charge. If you contact us, we will be happy to give you friendly and honest advice. This allows you to realistically check whether and where you can install TenderConnect on your yacht.
2 pieces of compensation plates made of water- and impact-resistant POM. Compensates a tail difference of approx. 5 degrees on approx. 50 to 60cm (15 mm per side). Necessary for TenderConnect if the tail is more rounded.
2 pieces of compensation plates made of water- and impact-resistant POM. Compensates a stern difference of approx. 3 degrees on approx. 50 to 60cm (10 mm per side). Necessary for TenderConnect if the tail is more rounded.
SPARE PART ONE PIECE. Quick-releases make it easy to adjust boom lengths to different sizes of inflatable boats. Quick-releases are used instead of screws between the boom and its extension. These are so-called ball lock bolts that can be inserted and locked or removed without tools.
SPARE PART: 1 set transducer stainless steel casting. Delivery: 1 x stainless steel transducer incl. main and control bolt consisting of two individual parts 2 x V4A M8 mounting bolts 2 x V4A M8 nuts without back plate and washers.
SPARE PARTS: 1 set of transducers for external mounting Material: Electropolished high-quality alloyed cast stainless steel (material no. 1.4584, EN 10283) Delivery: 1 x stainless steel transducer WITHOUT main and control bolts consisting of two individual parts 2 x V4A M8 self-tapping fastening screws
Stainless steel mounting plate for mounting transducers inside the yacht. Delivery: 2 x one piece stainless steel back plate, drilled approx. 175mm x 50mm.
Fixed outrigger bracket on the dinghy. Scope of delivery: 1 x bracket for outrigger for attachment to the transom of the dinghy 1 x fastening set screws, nuts and washers without square outrigger rods and without quick releases Replacement delivery.
Using 50mm Quick-Releases, boom lengths can be easily adjusted to fit different sizes of inflatable boats. Quick-Releases are used instead of screws between the boom and its extension.
Screw set for mounting the TenderConnect transducers on the dinghy. Delivery content: 8 x screws M6 V4A on 100mm x 100mm base plate 8 x nuts V4A with self-locking 16 x washers V4A
Transducer of the fixed boom on the dinghy. Delivery contents: 2 x transducer for outrigger for attachment to the transom of the dinghy without outrigger square rods, screws and without quick-releases replacement delivery.
Using 50mm Quick-Releases, boom lengths can be easily adjusted to fit different sizes of inflatable boats. Quick-Releases are used instead of screws between the boom and its extension.
 
 
 
 
 
 
 
 
 
 
Deutsch 
English 
Français 
Italiano 
Español